DOI Number :
Hits : 11

Hubungan Antara Besar Butir dengan Kekuatan dan Kekerasan pada Aluminium Paduan Berbutir Kasar

Harsono Wirjosumarto & Rudy Setyo Purnomo

 


Abstract.

Hall-Petch relation, σt = σi + KD-1/2, is re-examined and tested to a coarse grain aluminum alloy with grain size between 0.069 mm and 0.404 mm. The result indicates that the theoretical and experimental value of K match each other closely, i.e. Kth = 0.0514 and Kexp = 0.052. 0n the other hand the experimental value of the exponent is -1.86 instead of -0.5. The experimental relation between hardness number and strength matches reasonably well to the theoretical analysis, which is linear. The experimental value of the linearity constant is Cexp = 0.335 and the theoretical constant is Cth= 0.35 0.39, therefore this aluminum alloy the relation is σt = 0.335 BHN. The grain size difference of the specimen was obtained by strain-annealed method by varying the annealing temperature at constant strain and annealing time.



Keywords:

Download Article
 
Bahasa Indonesia | English
 
 
 

Notification:

Begin on 10 October 2014 this website is no longer activated for article process in Journal of Mathematical and Fundamental Sciences, Journal of Engineering and Technological Sciences, Journal of ICT Research and Applications and Journal of Visual Art and Design. The next process will be proceeded under new website at http://journals.itb.ac.id.

For detail information please contact us to: journal@lppm.itb.ac.id.

 
       
       
       ITB Journal Visitor Number #14981663       
       Jl. Tamansari 64, Bandung 40116, Indonesia Visitor IP Address #       
       Tel : +62-22-250 1759 ext. 121 2011 Institut Teknologi Bandung       
       Fax : +62-22-250 4010, +62-22-251 1215 XHTML + CSS + RSS       
       E-mail : journal@lppm.itb.ac.id or proceedings@lppm.itb.ac.id Developed by AVE