DOI Number : 10.5614/itbj.sci.2009.41.2.2
Hits : 11

Structure and Properties of Polymers Prepared by Polymerization of 2,2-Dimethyl-1,3-Propandiol and e-Caprolactone Monomer

I Made Arcana*, M Hasan, Shinta Dewi Anggraini, Asti Ardhyo Febrianti, & Aditya Ardana

Inorganic and Physical Chemistry Research Division, Faculty of Mathematic and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia, Fax No. : 62-22-2504154, E-mail Address: arcana@chem.itb.ac.id


Abstract. Poly(e-caprolactone) (PCL) is very attractive synthetic polymer due to its properties, such as a high permeability, the lack of toxicity, and also biodegradability. However, it has limited application because of low melting point (60 C), high crystallinity, and brittleness. The aim of the experiments is designed to improve the properties of PCL by formation of their polymers with 2,2-dimethyl-1,3-propandiol monomers with various chain length as a raw material to prepare poly(urethane-ester). These polymers were synthesized by a ring-opening polymerization of 2,2-dimethyl-1,3-propandiol and e-caprolactone monomers in various composition in the presence of 1-hydroxy-3-chloro-tetraisobuthyldistanoxane as a catalyst. Polymers were characterized by analysis of functional groups (FTIR), microstructure (1H and 13C NMR), viscosity, hydroxyl number, and also melting point of polymers (DSC). Based on the structure analysis indicate that polymerization of 2,2-dimethyl-1,3-propandiol and e-caprolactone monomers produced polymers with various molecular weights, which depend on the ratio of e-caprolactone / 2,2-dimethyl-1,3-propandiol  used in polymerization. The reactivity of CL monomer decreases to the active site of polymers with longer chain size. The melting points of polymers increase with the increasing of e-caprolactone composition used in polymerization, whereas hydroxyl number decreases.

Keywords: Block polymer, Caprolactone, Distannoxane, Propandiol, Properties

Download Article
 
Bahasa Indonesia | English
 
 
 

Notification:

Begin on 10 October 2014 this website is no longer activated for article process in Journal of Mathematical and Fundamental Sciences, Journal of Engineering and Technological Sciences, Journal of ICT Research and Applications and Journal of Visual Art and Design. The next process will be proceeded under new website at http://journals.itb.ac.id.

For detail information please contact us to: journal@lppm.itb.ac.id.

 
       
       
       ITB Journal Visitor Number #13721151       
       Jl. Tamansari 64, Bandung 40116, Indonesia Visitor IP Address #       
       Tel : +62-22-250 1759 ext. 121 2011 Institut Teknologi Bandung       
       Fax : +62-22-250 4010, +62-22-251 1215 XHTML + CSS + RSS       
       E-mail : journal@lppm.itb.ac.id or proceedings@lppm.itb.ac.id Developed by AVE